3383, RE: Hardware changing on Plugs Posted by kpn, Sun Mar-02-08 01:14 PM
>>>Thanks Magmaster....i just ran out of Hypers but i have >>some >>>spros power split rings. You think I can go to a store like >>>Home Depot and find the stainless screw eyes? >> >> >>Nicco, >>One of the lure in the first picture is called KPN lure >>correct? I'm the maker of that lure. I bought the ss >hardware >>from the site mention above and from Staminainc.com. I have >>some of them, if you want, let me know I will let you have >>them the same $ as I got from them. >>No! You can not find screw eyes at Home Depot, they carried >ss >>hardware, but NOT what you need (believe me, I went through >>that already). >>To me, the size of the screw is not inportant, as long as >your >>screw is long enough. >> >>KPN. > >thats your plug alright, Kahn. >On a side note I think you should get your plugs up in the >review section here. They are really nice plugs with internal >rattles. And I know there have been some good catches on >Stripers. >Kahn the plug is a 6" and the screw eyes are a total length of >5/8 with 1/4 of thread, sounds to short, you think? > >I have another plug from the same maker it is 71/2 and the >screw eye are a total length of 3/4 with 3/8 of thread, how >does that sound? > >If you have something that will be better let me know, okay? >thanks >
Nicco, I think 5/8" screw for the 6" plug and 3/4" for 7 1/2" is too short. I used 1 1/8" to 1 1/2" for my plugs and I also used liquid nail when I applying the screws. I have 1 1/8" & 1 1/2" SS screw and I can help you to fix the plugs you have. I don't know how to get the plugs to the review section....(to whom & where). I would appriciated your input.
Check your PM.
Khanh aka KPN.
|