>>>Thanks Magmaster....i just ran out of Hypers but i have
>>some
>>>spros power split rings. You think I can go to a store like
>>>Home Depot and find the stainless screw eyes?
>>
>>
>>Nicco,
>>One of the lure in the first picture is called KPN lure
>>correct? I'm the maker of that lure. I bought the ss
>hardware
>>from the site mention above and from Staminainc.com. I have
>>some of them, if you want, let me know I will let you have
>>them the same $ as I got from them.
>>No! You can not find screw eyes at Home Depot, they carried
>ss
>>hardware, but NOT what you need (believe me, I went through
>>that already).
>>To me, the size of the screw is not inportant, as long as
>your
>>screw is long enough.
>>
>>KPN.
>
>thats your plug alright, Kahn.
>On a side note I think you should get your plugs up in the
>review section here. They are really nice plugs with internal
>rattles. And I know there have been some good catches on
>Stripers.
>Kahn the plug is a 6" and the screw eyes are a total length of
>5/8 with 1/4 of thread, sounds to short, you think?
>
>I have another plug from the same maker it is 71/2 and the
>screw eye are a total length of 3/4 with 3/8 of thread, how
>does that sound?
>
>If you have something that will be better let me know, okay?
>thanks
>


Nicco,
I think 5/8" screw for the 6" plug and 3/4" for 7 1/2" is too short. I used 1 1/8" to 1 1/2" for my plugs and I also used liquid nail when I applying the screws.
I have 1 1/8" & 1 1/2" SS screw and I can help you to fix the plugs you have.
I don't know how to get the plugs to the review section....(to whom & where). I would appriciated your input.

Check your PM.

Khanh aka KPN.